Products
Systems
Controls
LIFT & DISTANCE TABLE (12 GPM)
PERC-RITE LIFT & DISTANCE TABLE
12 GPM SEMI-AUTOMATIC DRIP SYSTEMS: 24" EMITTER SPACING

LIFT & DISTANCE TABLE QUALIFICATIONS

  1. The vertical lift is the elevation difference between the "Off Level Float" and the highest point in any drip zone.
  2. The supply/return line column is the distance from the filter to the farthest drip zone.
  3. The diameter of the pipe from the pump tank to the optional filter unit is 1-1/2" minimum.
  4. All zone supply and return pipes are 1".
  5. The flush return pipe from the filter box to the pretreatment tank is 1-1/2" gravity.
  6. The maximum distance from the pump tank to the optional filter valve box is 30' and the vertical lift from the pump chamber to the optional filter valve box is 8'.
  7. These tables may be used with the standard zone detail configuration only. A calculation sheet (not included herein) must be filled out for any other configuration.
  8. Top feed manifolds must be used when any discernible slope is encountered.
  9. Remote zone valves are needed when pumping downhill from the filter.
  10. Return pressure assembly is needed when pumping uphill from the optional valve box.

LIFT & DISTANCE TABLE
12 GPM SEMI-AUTOMATIC PERC-RITE DRIP SYSTEMS: 24" EMITTER SPACING
Maximum Static Lift ("Off Level Float" to Drip Field)

Table A:
STANDARD QM LIFT & DISTANCE TABLE
  Supply/        
1 Return Line 2-Lat 3-Lat 4-Lat 5-Lat
  (feet) 300' 300' 250' 150'
2          
3 100 100 83 78 86
4 150 98 80 73 80
5 200 96 76 68 74
6 250 94 72 62 68
7 300 92 69 57 63
8 350 90 65 52 57
9 400 88 62 46 51
10 450 86 58 41 45
11 500 84 54 36 39
12 550 82 51 30  
13 600 80 57 25  
14 650 78 44 20  
15 700 76 40 15  
16 750 74 36 9  
17 800 72 33 Note:
Use Table B
when using
HydroSeq
Valve
18 850 70 29
19 900 68 26
20 950 66 22
21 1000 64 18
Table B:
QM w/ HYDRO SEZ DISTRIBUTING VALVE
  Supply/        
1 Return Line 2-Lat 3-Lat 4-Lat 5-Lat
  (feet) 300' 300' 250' 150'
2          
3 100 61 61 61 61
4 150 58 58 58 58
5 200 56 56 56 56
6 250 53 53 53 53
7 300 50 50 50 50
8 350 47 47 47 47
9 400 44 44 44 44
10 450 42 42 36 42
11 500 39 39 31 39
12 550 36 36 25  
13 600 33 33 20  
14 650 30 30 15  
15 700 28 28 10  
16 750 25 25 4  
17 800 22 22 Note:
Use this table
when using
HydroSeq
Valve
18 850 19 19
19 900 16 16
20 950 14 14
21 1000 11 11

AMERICAN MANUFACTURING COMPANY, INC.
Last revised: Jan-9-2006
Comments to: info@americanonsite.com
Copyright © American Manufacturing Company, Inc., 2000

HOME | ABOUT | ORDER INFO | PRODUCTS | DRIP SYSTEMS | CONTROLS | CONTACT | DATA CENTER | SITE MAP